POT HAULER 350
The sheave size is 350mm or about 14"
The motor size is optional but standard is 159cc Char Lynn Flow and pressure is dependent on application and how much torque you want - 36LPM is about mid range for this motor. At that flow rate and a pressure of 55Bar or 800PSI you would get almost 100kg of pull at 200RPM The motor will handle pressures from 200 - 2000 PSI .
Inshore - Coastal pot hauler.
Blue nose and Hapuka fishery
Line capacity 4 mm- 12 mm
Line speed 0 -3 metres/second
Line pull 0 - 300 kg
300 - 900 kg
WIDE HAULER 250
Intermediate float hauler for bottom line fishery.
Light inshore pot hauler.
Supplied with or without start/stop valve.
Line Speed 0-10 metres/second
Line capacity 2 mm - 6 mm / 4 mm - 8 mm
Line pull 0 -100 kg /100 -200 kg / 200 -300 kg
Steel spool ( Galvanized)
Alloy frame designed for Bluenose and Hapuka Industry.
Fishing depths up to 600 metres includes level winder.
Steel Spool (Galvanized).
Alloy frame 4 sizes available
for 4 mm nylon 20 Nm / 30 Nm / 40 Nm / 50 Nm
Includes level winder and 200 cc radial piston motor
MUSTAD COMMERCIAL TUNA HOOKS
Beauline International is the Distributor/Agent for Mustad commercial hooks in New Zealand. Mustad was established in 1832 and is one of the largest and oldest manufacturers of fishhooks in the world.
The Mustad know-how and craftsmanship acquired through centuries of hook making coupled with the technological advances made by Mustad Research and Development personnel have made the Mustad hooks unmatched in strength, more refined and always reliable thanks to stringent quality control measures.
Beauline International has a great range of Mustad Tuna hooks available in the size that suits you. See hooks here.
FLOATS & MARKERS
A full range of floats including low drag inflatable and polystyrene.
Heavy Duty Polystyrene float 600L
600mm X 200mm
Heavy Duty Polystyrene float 400L
400mm X 200mm
Heavy Duty Polystyrene float 300S
STROBE - SL-201
SNAPS & SWIVELS
CRIMPS & ANTI-CHAFF GEAR
Aluminium crimps, luminous light sleeves, hook protectors, hand & bench crimpers, luminous light sleeves.
Hand Held Crimper
Single Silver Sleeves
7mm by - 0.8mm, 1.0mm, 1.3mm, 1.5mm
18mm by - 1.5mm, 1.7mm, 2.0mm, 2.3mm, 2.4mm, 2.6mm, 2.8mm, 3.1mm, 3.3mm
Bench Type Crimping Tool & Dies
* 5-Positioned Crimping Hole Type
* Interchangeable Dies Type
* Dies(=TIP) Size : A ~ G
* 27" Long & 7 kgs weight
10mm x 18mm
Luminous Light Sleeves
Long glow Light sticks in both 4” and 6”.